Atomstack R30 V2 Upgraded Infrared Laser Module 1064nm Laser for Engraving Metal and Plastic

$469.00

0.03mm Circular Laser Spot
✅ Metal Rust Removal
Born for Metal & Plastic Engraving
✅High Compatibility: Adaptable to most of the engraving machines, such as Atomstack, Ortur, NEJE, Two-Trees, etc.

PLUG TYPE: US Plug

US Plug
EU Plug
UK Plug
AU Plug
  • Warranty:
    1-Year for New Machines

  • Shipping Time:
    Within 1-3 Days

  • International Express:
    3-5 Working Days

  • Liner Logistic:
    7-10 Working Days

Note: Customs duties will be incurred if your order is shipped from China.

paypalvisamasteramerican expressdiscoverapple paygoogle payklarnaafterpay

Laser Engraving Review and Expert Analysis

Description:

  • The World's First: Atomstack is the first to launch an industrial-grade 1064nm infrared laser module with a repetition rate of 20,000Hz, which is suitable for fast and fine metal engraving, as well as non-metallic materials such as varnished wood furniture, ABS, and plastic.
  • Greatly Improve Working Efficiency: After industrial design, the net weight of the module is only 450g (the first generation and other products in the industry are 800g+). Movement speed and work efficiency can be increased by 40% under the same framework.
  • Born for Metal and Plastic Engraving: Infrared fiber laser has incomparable advantages in engraving metal and plastic surfaces, which is impossible for conventional diode blue lasers.
  • Better Engraving Effect: Thanks to the Atomstack spot compression technology, the spot of the R30 laser module is compressed into a circular laser spot with a diameter of 0.03mm. This makes it suitable for engraving on custom jewelry or metal. The engraving effect on the surface of the object will also be finer, clearer and less susceptible to oxidation.
  • Rust Removal: The 1064nm wavelength laser has excellent absorption ability to the metal surface coating, and it can also remove rust on a small area of rusty metal without chemical reaction or secondary electrolysis.
  • High Adaptability: R30 laser module can be adapted to most Atomstack models, including:

                       A30 Pro, X30 Pro, S30 Pro
                       A20 Pro, X20 Pro, S20 Pro, A20
                       A10 Pro, X7 Pro, S10 Pro, X7
                       A5 Pro, A5 Pro+
                       A5 M30, A5 M40, A5 M50
                       A5 20W, A5 10W
                       

If you own other brands of engraving machines, such as Ortur, NEJE, Twotrees, etc., you can also install our Atomstack R30 laser module on your engraving machine. The R30 laser module comes with a free adapter in the box.

  • Safety Laser: Compared with blue laser, infrared laser has its own safety characteristics. The non-focused light is cold light, which will not cause burns if touched accidentally.
  • Longer Lifespan: 1064nm laser light is stable, with a long service life of 100,000 hours (there will be a certain power attenuation after long-term use)

Specification:

Brand

Atomstack

Model

R30 V2

Optical Output Power

2W

Product Material

Aluminum 6061 Anode

Circuit Board Size

44*52mm

Laser Wavelength

1064nm

Circuit Board

V/PWM Modulation Board

Wire Rod

22# 2P2.54 Terminal Reverse Wire 80mm

Optical Lens

φ6/glass

Fan

12V

Laser Beam Mode

Spot

Working Mode

Pulse Work

Lightspot Size

Φ0.03mm

Working Time

100000H

Working Temperature

0℃~70℃

Storage Temperature

一40℃~85℃

Light Temperature

Non-focal temperature: room temperature

Product Net Weight

450g

Cautions:

1. The laser module emits laser light that may injure human eyes, so do not look directly at its end while working. Please wear appropriate safety glasses to prevent laser exposure.
2. The laser module requires a suitable laser driver (PCB). When the laser module is connected to the power supply, please set the output voltage to zero. The current should be gradually increased or decreased when adjusting to avoid damaging the device.
3. Keep the device in a dry environment for working or storage. The dustproof level is 1 million or more to prevent the dust inside the lens from affecting the shape of the laser dot.
4. Laser working at high temperature will increase the threshold current, reduce the conversion efficiency and accelerate the aging of the device.
5. When the output power is higher than its specific operating parameters, the device will accelerate aging.
6. When the laser diode's operating temperature exceeds 70 degrees, please dissipate heat for it.
7. The laser module is a static sensitive device, please make sure you are grounded or wear an anti-static wristband before use.

How to install:

Details:

 

Shipping

Order Processing

Orders will be processed within 1-3 business days after full payment is received. Tracking numbers will be updated as soon as they become available.

Multiple packages of the same order may arrive from different fulfillment centers, or at different times depending on the availability of the item.

If the item you ordered is temporarily out of stock, you will be contacted by our customer service representative. You can choose to wait for re-stocking or cancel your order.

For more information on standard delivery and express shipping, please select your shipping country or shipping region from the following:

Country or Region Shipping Method Ships From Shipping Time(Working Days) Shipping Fee
United States UPS United States 2-5 Free
United States DHL / UPS China 3-5 Free

EU Member States

DHL / GLS / G2G / UPS / PPL Germany / Czech 3-5 Free
EU Member States DHL / FedEx China 3-7 Free

Asian Countries

DHL / FedEx China 3-7 $19
Switzerland,  Norway DHL / FedEx Czech / China 3-7 $29
United Kingdom, Cyprus(EU Member States DHL / FedEx China 3-7 $29
Canada, Mexico, Australia, and Other countries UPS / DHL / FedEx China 3-7 $49

EU Member States:  Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden

Asian Countries: Singapore, Malaysia, Japan, Thailand, Korea, Philippines, Vietnam, Indonesia and so on.

The shipping time is a estimated time. Invalid address, customs clearance procedures, the bad weather or other reasons will lead to a longer delivery time than expected.

Which warehouse will your package be shipped from?

US PLUG / USA: Shipping to USA only  ( Please don't place the order from this warehouse if you're not in USA).
EU PLUG / EU MEMBER STATES: Shipping to EU member states only  ( Please don't place the order from this warehouse if you're not in an EU member state).
CN: Shipping to all countries where orders can be placed.

About Customs Duty

Most of our products are stocked in US warehouses and European warehouses. In this case, most of the customer's orders will be shipped from the corresponding warehouses, so customers from EU member states and the US do not need to pay any customs duty. Orders from other countries will be shipped from the Shenzhen Warehouse in China, and most of the orders will incur customs duty, which is borne by the customers themselves.

However, if the products are out of stock in the US or EU countries' warehouses, we will also ship them from Shenzhen, China. In this case, customers from EU member countries need to bear the customs duty by themselves.

Don't worry, we will contact customers in advance if they need to bear the customs duty.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
Philicheeze
R30 IR Module

R30 IR Module is a great addition to my leather shop. Although a little slower than my 20w it is precise and makes beautiful engraving on my Slate coasters and painted insulated cups. Easy to install on my existing machine.

Philicheeze, thank you for your feedback on the Atomstack R30 V2 Infrared Laser Module!

We're glad to hear that you are seeing precise and beautiful engraving results on your coasters and cups. We appreciate your business and hope the R30 V2 continues to meet your needs. Happy engraving!

Best regards,
Atomstack Team

F
Francois Rohrbeck

Atomstack R30 V2 Upgraded Infrared Laser Module 1064nm Laser for Engraving Metal and Plastic

M
Mario Zauner
Customer service

I was really excited of the serviceteam of Atomstack! Nice words, prompt handling, fast shipping! Wonderfull!

D
Darko Markovic
Awesome laser module

I own 5 blue laser modules. Limitation of blue diode lasers is their wave length. Simply put no matter how strong wave length of around 450 nm does not work on reflective stuff. So I have ordered Atomstack R30 V2 and dedicated machine for it. I needed to be able to engrave on metals and make nice accurate engravings on black acrylic. That is exactly what this module does. In combination with my other lasers now I can do all I need with lasers. Module is as heavy as high power multi blue diode laser heads. Considering that it consumes as much as 10-12 Watt blue laser module and makes only 2 Watts output one would think it is a weak laser. Well you would be wrong to think that. It just works. Optical power that comes out of it just does its magic. Even at 30% power in my test on the Aluminum cards I can fee with my fingers that engraving is into the material. Beam focus spot is very accurate too. This means that that power is applied at very small surface.
Build Quality is very good driver board is in the airflow path. Fan seems to be 50x50mm.
Focus foldable leg seems to work good to,
Remember this is not a cutter. This is engraving stuff on metals and plastics and that works great.
Is it perfect? Well almost. Way better than most of the modules I have seen by now.
Adapter plate is heavy. 92 grams.
There is no mounting place for the connection board.
That is about it.
It does not cut so no need for the air assist.
It is on the heavier side but that is the case with so many high power modules.
Price is higher but that is same with all flagship models.
You want machine that can move it accurately and fast enough. Well if you give 400 plus bucks for the module you can't expect to put it on 100 bucks toy machine either.
I can't be sure how it is going to perform over time but for now I am very satisfied and considering how it is built I believe it is going to last very long..
Now I have setup of 3 machines doing different tasks. Being able to engrave bare metals improved my capabilities a lot. I am very happy with it,